Please enter your email
You will receive a verification email, please fill in the 6-digit verification code in the email.
The verification code is incorrect or has expired
Please enter your password
* This field is required
* No special characters allowed
* Minimum 6 characters required
This password is undifined.
Password reset complete.
Your current default units inch,Please fill in all the information again.
Only material FR4-High Tg 170C and normal lead time available for the board with ≥ 3oz finished copper weight.
Layer stackup as our default, if not acceptable, please kindly turn the order to "Standard PCB".
Please note that V-scoring could only cut from one side instead of from both sides when finished thickness smaller than 0.6mm.
The stock of the halogen material is random, normally it will take additional 10-25 working days for material refilling, we'll confirm with you about the specific lead time after order processed.
Please note that V-scoring could only cut from one side instead of from both sides when finished thickness smaller than 0.7mm.
The soldermask color should be different with the silkscreen color, please modify.
Additional cost would be charged for the PCB with gold area covers more than 15%, but the gold area could only be calculated after file been checked, hope you can understand.
Your current Dimension unit was changed. please go to the personal center, to modify the Dimension unit so that we can accurately calculate the price.
Thank you for your subscibing!
PCB successfully added to your shopping cart